Vehicles
Sections
125 not categorized PORSCHE 356 B BRACK PORTSCan't find what you need? Try browsing the Accessories or Exploded Diagrams!Filtered by: BOXSTER 1997-04 (includes uncategorized and accessory items) 96452106500 This extension is meant for use with racing shell style seats or the original rennsport style seats. One extension per side is needed for original seat belts. Two extensions per side are needed for 4 / 5 or 6-point harness. Sold individually.
From $42.90
Make a selection 99950758640 Known as: bracket / cable holder View/Change Diagram
$1.55
Make a selection FVD33150046R Replace worn-out original soft rubber (65 shore hardness value) track rod bushings with our FVD clubsport series. They are made of rubber that has an 85-shore hardness value, the same as the rs models. 85-shore is more durable, provides more positive suspension location and is quiet and more forgiving than a monoball upgrade. This bushing is made in Germany, weather sealed, crafted in high carbon steel and 7075 t6 aircraft aluminum and includes an 85-shore hardness value core. Sold individually. 8 are necessary per car. Please note: this does not include the track rod, the picture circled in red is just for reference.
$66.00
Make a selection
From $26.48
Make a selection FVD34101707ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection FVD34101807ATK Unsure about installing replacement bushings and bearings? Send us your control arm and we will properly recondition and install the bushings and bearings for you. The reconditioning process includes full inspection of your track control arm to ensure proper operation after the remanufacturing process. We then disassemble, degrease and completely clean it. Once fully prepared, we will properly install our FVD clubsport front control arm bushings, part # FVD341999r. They are made with 85 shore rubber (like the rennsport model). Please note: each control arm is remanufactured in Germany, so the lead times can vary. If we cannot remanufacture your control arm we will notify you as soon as we can. Arrangements can ...(choose a part on the right to read more)
$418.00
Make a selection FVD34105385 Querlenker FVD641330360 mit 85 shore sportbuchsen und lager. Sport lager mit 85 shore sind 40% harter gegenuber den originalen oem-lagern (65 shore). - perfekt fur sportlich-strasse und clubsport
$313.50
Make a selection 99650553101 Known as: retaining strip View/Change Diagram
From $98.04
Make a selection 98642628702 Known as: support f >>98ws6 20894 View/Change Diagram
$6.01
Make a selection 99655267302 Known as: retaining bar radio / retaining bar View/Change Diagram
$31.68
Make a selection 99650134100GRV View/Change Diagram
$42.68
Make a selection 99655265301 Known as: retaining bar View/Change Diagram
$53.79
Make a selection 12637030SR Power slot front right slotted rotor Porsche Boxster 97-04 General FitmentBOXSTER 1997-04
$335.07
Make a selection 115900997BIGT3 The legendary pss10 suspension now available for the 997 GT3/rs and GT2. 10 way adjustability,variable ride height settings and dual spring configuration make the pss10 the perfect suspension for club sport or track events
$4,767.40
Make a selection 115900993B12 If you're looking for the perfect combination of sporty dynamics, a superior appearance and high performance, you're on exactly the right track with this sport suspension. This kit is a direct replacement for the factory mo33 kit and will give you the same performance characteristics. -professional cornering system pcs -precise response, excellent driving performance and high reserves of safety -lowering up to 10 - 15 mm in front and rear -eibach pro-kit performance springs with progressive characteristic -springs and shock absorbers road-tested and fine-tuned to complement one other perfectly -bilstein gas pressure technology -bilstein mono-tube/upside-down technology, made in Germany -German TUV certificate...(choose a part on the right to read more)
$2,258.29
Make a selection 08682 3m window weld primer is important to both seal the track around the windshield frame to cover scuff through scratches as well as provide a good sealing sticking surface for the butyl tape before you stick the windshield.
$29.99
Make a selection 12637030SL Power slot front left slotted rotor Porsche Boxster 97-04 General FitmentBOXSTER 1997-04
$335.07
Make a selection 46957161SW Wider is better! H&r trak+ wheel spacers move your wheels and tires outwards so they are more flush with the fender-instantly giving your vehicle the perfect stance. High end sports car manufacturers use every millimeter of fender space available in their design for the best looks and highest performance and so should you. With trak+ you can fill the gap in your fenders and go wide! General Fitment911 2005-08911 1998-05 911 2009-12 911 TURBO/GT2 2007-09 BOXSTER 1997-04 BOXSTER 2005-08 BOXSTER 2009-11 CAYENNE 2003-06 CAYENNE 2011-14 CAYMAN 2006-08 PANAMERA 2010-14
$202.43
Make a selection 10010303806 The 11.8:1 compression will provide you with more acceleration than kits with 11.3:1 compression. For track use we recommend more aggressive cam (maximum valve lift (tdc) of 2.1 mm) . Piston's has very deep pockets for use with sport valves. These are 107 mm in size so are slip fit and do not require modifications. This kit is ideal for track use but can also be used on the street, it will add 35+ hp (depending on your additional modifications). Mahle pistons are forged for substantially higher and more uniform strength over pistons that are cast. Mahle cylinders are manufactured from st52 steel which has extremely high thermal resistance, they are nikasil coated which reduces wear and friction. We also have t...(choose a part on the right to read more)
$11,932.00
Make a selection 240996351OV Pagid orange rs44 are from the rs line of all-around racing brake pads. They are a medium friction coefficient racing compound with medium initial bite and excellent modulation. Rs44 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and offer smooth progression of friction from cold to hot. Rs44 pads offer lower disc wear rates and are fade resistant up to a temperature of 700*c (1,292*f). Applications include: club racing and rs44 are an excellent rear axle pad for front engine race cars. Features at a glance: medium friction coefficient medium initial bite excellent modulation pagid is one of the leading manufa...(choose a part on the right to read more) General Fitment911 2009-12911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08 BOXSTER 1997-04
From $277.20
Make a selection 240996351BV Pagid blue rs42 are from the rs line of all-around racing brake pads. They are a medium friction coefficient racing compound with medium initial bite and good cold friction. Rs42 pads are manufactured of a low metallic resin bonded material containing steel and acrylic fibers. They operate in a wide operating temperature range and are very stable over that wide temperature range. Rs42 pads offer excellent pedal feel and inspire confidence in extreme braking situations. They offer lower disc wear rates and are fade resistant up to a temperature of 650*c (1,202*f). Applications include: vintage rally racing, formula racing and touring cars. Features at a glance: medium friction coefficient medium initial bite goo...(choose a part on the right to read more) General Fitment911 2009-12911 2005-08 911 GT3 2003-05 911 TURBO/GT2 2001-05 911 1998-05 CAYMAN 2009-12 CAYMAN 2006-08 BOXSTER 2009-11 BOXSTER 2005-08 BOXSTER 1997-04
From $250.16
Make a selection 12637030CSL Power slot front left cryogenic slotted rotors Porsche Boxster 97-04 General FitmentBOXSTER 1997-04
$390.08
Make a selection 12637030CSR Power slot front right cryogenic slotted rotors Porsche Boxster 97-04 General FitmentBOXSTER 1997-04
$390.08
Make a selection © 2024 Automobile Atlanta Inc. 505 S. Marietta Pkwy • Marietta, GA 30060 • Order By Phone: 800 792 4944 770 427 2844 |